PTFE Lube 500m L32 NBQ

Technical information

Sticky PTFE Lube

High-load, wide-temperature lubricant. The product contains Teflon particles that extend lubrication intervals, reduce friction and increase load capacity. The product has excellent climbing and surface stability and good corrosion resistance.

Base materials PTFE powder, semi-synthetic oil, high-load and anti-wear
additives, antioxidants, anti-corrosion additives, thickeners
Colour slightly yellowish
Temperature resistance -40 ºC to +200 ºC
Corrosion resistance very good (ASTM D665)
Load resistance working load 2200N, jamming load 2300N
(Shell 4-Ball Welding DIN51350 - 1500rpm)
Water resistance very good
Density 0.677g/ml
Base oil viscosity
at 40 ºC 300 cSt

• Transport, store and use in the temperature range +5 ºC to +45 ºC
• Shake the aerosol well before use.
• Make sure the surface is clean before spraying. If necessary, clean the surface with Brake Clean.
• Spray the product evenly onto the surface from a distance of 25 cm.
• The product can only be sprayed by holding the aerosol in an upright position.
• Allow the solvent in the product to evaporate and then assemble the parts.

Sticky PTFE Lube is suitable for lubricating chains, ropes, gears, rails, hinges, stops, bearings and lifting screws. These applications are usually characterized by high loads, high temperatures, water access and severe weather. The product lubricates, protects, prevents seizing and conducts heat away from the lubrication point. NB! Do not use in delicate mechanisms and very dusty assemblies! Not best suited for lubricating
fast chains. (Eg: motorcycles, karts, etc.)!