Chain & cable greas 500ml L87 NBQ

Technical information

Chain and cable grease

A lithium complex lubricant with good climbing properties. The high MOS2 content gives the product very good load and temperature resistance (short-term up to +450 ºC). Due to the special composition the product has good adhesion to various surfaces, excellent corrosion resistance and water repellency.

Suitable for the lubrication and assembly of chains, ropes, gears, rails and cylindrical
surfaces.
These applications are usually characterized by very high loads, friction, different temperatures
and aggressive environments.

• Storage, transport and use temperature range +5 ºC to +40 ºC.
• Shake the aerosol thoroughly before use.
• Make sure the surface is clean before spraying. If necessary, clean the surface with Brake Clean.
• Spray the product evenly onto the surface from a distance of 25 cm.
• The product can only be sprayed by holding the aerosol can upright or upside down.

Allow the solvent in the product to evaporate and then assemble the parts.
Base materials lithium complex soap, mineral oil, additives and MOS2
Colour dark grey
Odour typical
NLGI class 1
Load resistance 4-Ball (IP239) 295kg
Load resistance very good
Corrosion resistance ASTM D4048 = 1b
Wear 1h/400N 0.8mm
Water resistance very good
Temperature resistance -30 to +160 °C (short-term +450 °C)
Density 0.611g/ml
• Good climbing ability
• Good adhesion and water repellent
• Temperature resistance -30 °C
to +160 °C
• High load resistance
• Good corrosion resistance
• Long-lasting