Dry MOS 2 Lube 400ml L80 NBQ

Technical information

Dry MOS 2 Lube

Heavy-duty assembly grease that facilitates the pressing and assembly of parts. The main ingredients are molybdenite and additives. Thanks to the aforementioned composition, the dried product withstands extreme loads, a wide temperature range, significantly reduces wear on friction surfaces and remains on the surface very well. Since the product dries quickly, it is an ideal lubrication solution even in dusty environments. The dried product can only be cleaned from the surface with special solvents or mechanically. GENERAL INFORMATION

Base materials molybdenite, EP additives, adhesives
Colour dark grey
Odour typical
Temperature resistance -190 ºC to +340 ºC
Load resistance up to 6900kg/cm²
Corrosion resistance low
Density 1g/ml
• Withstands high loads
• Drys quickly
• Good surface stability

Dry MOS 2 Lube is suitable for the assembly and disassembly of shafts, bushings and bearings and for the lubrication of various
sliding surfaces.
These applications are usually characterised by extremely high loads, precise seating, a wide operating temperature range
and an abundance of dust or dirt.

• Storage, transport and use temperature range from +5 ºC to +45 ºC.
• Shake the aerosol thoroughly before use.
• Make sure the surface is clean before spraying.
• If necessary, clean the surface with Brake Clean.
• Spray the product evenly onto the surface from a distance of 25 cm.
• Let the product act for a moment and install the parts.
• The product can only be sprayed by holding the aerosol in an upright position.
• After use, turn the aerosol upside down and spray until no more product comes out.
This is important for cleaning the spray nozzle.