Durable lube 500ml L51 NBQ

Technical information

Durable Lube

Fully synthetic ester oil-based long-lasting lubricant. The product has outstanding thermal, hydrolytic and oxidation stability, low oil mass loss at high temperatures, good climbing ability, water repellency and corrosion resistance. Thanks to the fully synthetic base oil, the product can withstand temperatures from -35 °C to +250 °C.
High-quality EP and AW additives give the product good load-bearing and anti-wear properties.

Durable Lube is suitable for the lubrication of chains, conveyor belts, open mechanisms, screws, hinges, sliding surfaces, rails and cables operating in difficult conditions and in a highly variable temperature range.
• Storage, transportation and use temperature range +5 ºC – +45 ºC.
• Shake the aerosol thoroughly before use.
• If possible, clean the mechanisms before lubrication.
• Spray the product evenly onto the surface from a distance of 25cm.
• The product can only be sprayed by holding the aerosol in an upright or upside down position.
• Allow the solvent in the product to evaporate before assembly.
Base materials fully synthetic ester oil blend, EP, AW and AC additives
Colour transparent, yellowish
Odour typical
Synthetic base oil
Viscosity at 40 °C 320 cst
Temperature resistance -35 °C to +250 °C
Water resistance good
Load resistance very good
Shell 4-ball test (IP239) 2000Nm
Density 0.69g/ml
• Outstanding stability
• Good lubricating properties
• High load resistance
• Temperature resistance -35 °C
to +250 °C
• Biodegradable