Metall wax 2 500ml S30 NBQ

Technical information

Metal Wax 2

High-quality protective wax for metals. The product has good adhesion when sprayed and leaves a thin protective layer on metals when dried, protecting them from moisture, salt water and corrosion. The product reaches dust-free in 20 minutes at room temperature and dries completely in 6 hours. An important advantage of wax over paints is its easy removal with a solvent-based cleaner (Brake Clean). As an accessory, the product comes with a 360-degree spray nozzle with a long hose, ensuring easy and quick work even in the most difficult conditions.

Base materials wax, additives and antioxidants
Color yellowish brown
Temperature resistance -30 ºC to +80 ºC
Water resistance very good
Corrosion resistance very good (salt spray test DIN53210) Density 0.66g/ml

Automotive: protection of body cavities and internal surfaces of parts against corrosion (boxes, doors, hatches, trunk floors, etc.).
In industry: - protection of metal parts against corrosion during storage.
- protection of agricultural machinery against corrosion during standstill.
Transport, store and use in the temperature range +5 ºC to +45 ºC

Shake the aerosol thoroughly before use.
Before spraying, make sure that the surface is clean. If necessary, clean the surface beforehand with Brake Clean.
Spray the product evenly onto the surface from a distance of 25 cm.
The product can only be sprayed by holding the aerosol in an upright position.