Multi Hi-Tech Oil 400ml L30 NBQ

Technical information

Multi Hi-Tech Oil

Moisture-repellent fine lubricant consisting of a mixture of oils, antioxidants and a solvent. The product protects electrical components from moisture and repels existing moisture - it does not mix with water. The product effectively dissolves rusted and seized joints. The properties of Multi Hi-Tech Oil are cleaning, protecting, lubricating,
rust-breaking and moisture-repellent.

Base materials oil mixture, synthetic polymer, antioxidants, solvent, adhesion promoters
Colour slightly yellowish
Odour typical
Temperature resistance -50 ºC to +90 ºC
Low corrosion resistance
Low load resistance
Water resistance does not mix
Density 0.77g/ml
Base oil viscosity
105 cSt at 40 ºC
• Transport, store and use in the temperature range +5 ºC to +45 ºC
• Shake the aerosol thoroughly before use.
• Make sure the surface is clean before spraying. If necessary, clean the surface with Brake Clean.
• Spray the product evenly onto the surface from a distance of 25 cm.
• The product can only be sprayed by holding the aerosol in an upright position.
• Allow the solvent in the product to evaporate and then assemble the parts.

Multi Hi-Tech Oil is suitable for use in: maintenance of electrical components such as connectors, high-voltage cables, sensors, ignition coils and maintenance of mechanical parts such as bolts, nuts, locks, hinges, rails and pins. Due to its good cleaning properties, the product can also remove pitch stains, heavy grease and oils. NB! Do not use in mechanisms with medium or high loads and in places with access to a lot of water.