PTFE oil 400ml L33 NBQ

Technical information

PTFE Oil

Superfine synthetic lubricating oil. The product has excellent creep resistance and a wide operating temperature range. Thanks to its special composition, the oil has low internal resistance and good load capacity (PTFE particles) even in the most extreme conditions. The product is safe for plastic. Compared to Sticky PTFE Lube and PTFE Lube, PTFE Oil has significantly better creep resistance and the product can withstand a wider temperature range. Stability and low internal resistance at sub-zero temperatures are especially important. The product binds minimal dust and dirt.

Base materials PTFE powder, fully synthetic oils, antioxidants, anti-corrosion additives
Colour transparent, slightly yellowish
Temperature resistance -55 º C to +250 ºC
Corrosion resistance satisfactory
Load resistance-Shell 4 ball test 900 NM
Water resistance satisfactory
Density 0.683g/ml
Base oil viscosity at 40 ºC 31 cSt
PTFE Oil is suitable for lubricating locks, sliding surfaces, fine mechanisms, cables, bushings, roller skate bearings and hinges. These areas of use are characterised by lower than normal loads, dusty environments and a wide temperature range. In exceptional cases, it is also suitable for breaking down rust.

• Transport, store and use in the temperature range +5 ºC to +45 ºC
• Shake the aerosol thoroughly before use.
• Make sure the surface is clean before spraying. If necessary, clean the surface with Brake Clean.
• Spray the product evenly onto the surface from a distance of 25 cm.